Smart WLAN Selector

Google PlayStore-Bewertung : 4,7

SmartWlanSelector

 

Smart WLAN Selector – immer die beste WLAN Verbindung

Sicher kennen Sie das Problem, wenn Sie mehrere WLANs nutzen: obwohl eigentlich ein sehr starkes WLAN-Signal zur Verfügung stünde, wird die Verbindung zu einem mehrere Räume entfernten, viel schwächeren WLAN aufrecht erhalten. Sie müssen WLAN manuell aus- und wieder einschalten, um einen Wechsel auf das stärkere WLAN zu erzwingen.

Smart WLAN Selector macht endlich Schluss mit diesem Mangel! Die Verbindung zum besten WLAN erfolgt automatisch im Hintergrund.

Vorteile von Smart WLAN Selector gegenüber anderen WLAN Switcher-Apps:

  • Auswählbare Signalstärke-Differenz: Der Wechsel erfolgt erst, wenn z.B. ein um 20% stärkeres Signal im Vergleich zum aktuell verbundenen WLAN gefunden wird => ständiger Wechsel inklusive Verbindungsabbruch im Grenzbereich zweier WLANs wird vermieden!
  • Auswählbares Scan-Intervall für die Suche nach dem stärkstem WLAN
  • Eigenes Scan-Intervall für “Bildschirm aus” möglich. Bei ausgeschaltetem Display ist meist kein so rascher Wechsel erforderlich => bestmögliche Akku-Schonung
  • WLANs können vom Scan ausgeschlossen werden
  • Bestes WLAN wird sofort beim Einschalten des Bildschirms gesucht
  • Ruhemodus mit eigenen Scan-Intervallen zwecks Energie-Einsparung definierbar, entweder über die Uhrzeit oder über die Verbindung zu einem bestimmten WLAN. Beispiel: in der Arbeit haben Sie mehrere Netzwerke, zu Hause aber nur eines. Bei Verbindung zum Heimnetzwerk geht Smart WLAN Selector automatisch in den Ruhemodus. Erst wenn Sie den Bereich Ihres Heim-Netzwerks verlassen, schaltet die App wieder in den normalen Arbeitsmodus
  • Ausschalten des Netzwerk-Scans bei ausgeschaltetem Bildschirm oder im Ruhemodus zur maximalen Akku-Schonung möglich


Das alles macht Smart WLAN Selector zur flexibelsten und Akku schonendsten WLAN Switcher App im PlayStore!

HINWEIS

Um sich von den Vorteilen von Smart WLAN Selector vor dem Kauf überzeugen zu können, steht die kostenlose Test-Version “Smart WLAN Selector Trial” zur Verfügung. Die Funktionalität ist uneingeschränkter, jedoch läuft die App nach 7 Tagen ab.

Smart WLAN Selector => bestes WLAN

Hier gehts zum PlayStore

Fragen oder Anregungen bezüglich dieser App?

 => Email: support@at-programming.com

oder hinterlassen sie unten eine Nachricht.


35 Kommentare
  1. Ed sagt:

    Hi,
    How do I avoid that this app connects to a wifi network I do not want to connect to, in spite of the fact it has the strongest signal ?

    Thanks for your support.

    • wordpressadmin sagt:

      Hello,

      add the network to the list of “Excluded WiFis”. The app will skip them, but be aware: the Android system may still connect to these networks.

      Regards
      Alexander Tartar

  2. Carlos sagt:

    Alexander. I just wanted to congratulate you on your work in this app. I have installed it on 3 devices and it works perfectly. I copy the review here on Goggle. I hope it helps you. Thank you for your work. It is one of the best APP that I have installed
    Trust me. I have tested ALL the wifi switches available today. Including the most “popular” if you do a Google search. Only this one really works well on Android 10 (Samsung A50), Android 9 (Aquaris X) and Samsung Tablet. Others freeze or just don’t work. You can install the trial version (full features up to 7 days) and try it yourself. Easy to use, easy to configure, the app runs in the foreground (not in the background like many other APPS). It has a very useful widget to manually control the application. I have four WIFI at home (two 2.4G and two 5G) through the TPLINK PLC extenders. The application automatically switches between them according to your preferences. Top 10. Please, Alexander, keep the app updated! Thank you for your work!

  3. Lior sagt:

    Nice app, great idea!
    Will you agree to add a feature of “Prefer 2.4 GHz WiFis”? It shouldn’t be too hard since you already have a similar 5 Ghz option, right?

    It’s badly needed in order to connect devices like Roomba which still use only 2.4 but need a mobile device middleman for the setup. Therefore “If you are using a 2.4/5 GHz mixed network, make sure your mobile device is connected to a 2.4 GHz network…If your device is automatically switching back to the 5 GHz network during setup, your mobile device may need to forget the 5 GHz network. You can rejoin the network after setup.”

  4. William Powell sagt:

    Can this app be used to force connection to 2.4GHz network for setting up IoT devices for smart home use? Currently I have to disable 5GHz network in my router when adding new bulbs and other devices. This requires a router hack, and a router reboot (x 2) which disrupts other users in the home.

    • wordpressadmin sagt:

      No, not in the current version. You can prefer (not force) 5 GHz networks, but not 2.4 GHz networks.

  5. Tom Donofrio sagt:

    how much does the app cost sfter the trial is over?

    • wordpressadmin sagt:

      Hello,

      the paid version is an independent app. The price is about $2.6, but it variates with country/region. Please look for “SmartWiFiSelector” in Google Play to find out the local price in your currency.

      Best regards
      Alexander Tartar

  6. Rakini sagt:

    Please bring periodic scan to 10sec also please i need that update

    • wordpressadmin sagt:

      Sorry but 30 sec are the lowest possible interval. More frequent scans are blocked by the system.

  7. Игорь sagt:

    the application writes: “Not connected” (WIFI network
    – connected). What does this mean?

    • wordpressadmin sagt:

      “Not connected” indicates that the loacation permission in the background is missing. Without the permission the app isn’t allowed to receive any information about the current connected network. Therefore this message is displayed.

  8. Jason sagt:

    Hi, I am finding the app does not work, just says Not Connected, I have followed all the instructions. Any ideas?

    • wordpressadmin sagt:

      “Not connected” indicates that the loacation permission in the background is missing. Without the permission the app isn’t allowed to receive any information about the current connected network. Therefore this message is displayed.
      Goto system settings/Apps/SmartWifiSelector/Permissions/Location and set it to “Always”, then it will work.

  9. Jason sagt:

    Thanks, added Location and its now working! Thanks for the quick response, I just realised that the post before asked the same question!

  10. Dan Dinica sagt:

    Hi, I intend to buy this application, now I am in the trial period, but is something I do not like , why I must have all the time the location activated, I do not want some applications to have the information about my position . There is any possibility to use the software without this permission to read the position of my device ? It is not paranoia but really I do not want everybody to know where am I, and also to drain useless the battery…!! Thanks

    • wordpressadmin sagt:

      Unfortunately no chance. Without location permission and active location service the app doesn’t get any information about the currently connected network. It’ the current Google policy. Without knowing the SSID and signal strength of the currently connection, the app cannot work.

      But I don’t see the danger of “everybody knowing where you are”. Just disable the Google location history. That will also prevent additional battery drain. And when a third party app is actually using location access, you will see it by location icon in the notification bar.

      Nevertheless, basically I understand you point. Personally I find that Google policy very annyoing.

      • Dan Dinica sagt:

        Thank you for the detailed answer;sometimes in life you have to accept things that bother you but that is, everything has a price.

        • Dan Dinica sagt:

          Hi again,

          Please can you develop better the option : app-own WiFi’s…? I do not understand what this represent and how to use; I use now a Galaxy Note 20 Ultra with Android 11 and UI3.1, so probably it is an option good to use . Also what about Internet container who is the only network I can see when I try to add new one WiFi network to the list ?

          • wordpressadmin sagt:

            Please read the corresponding help (tap on the ‘?’ beside the app-own-WiFis option). It’s all explained there. I cannot explain it any better here. For Android 11 you will defenitely need app-own networks to make the app work.

  11. Bom dia!

    comprei esse app e ele é muito bom.
    gostaria de saber se ele tem em versão português?

    Assim ficaria mais facil para eu manusear ele melhor.

  12. michael branton sagt:

    Thanks for writing this! I tried the 7-day demo version (great idea to offer this!), and it worked perfectly, so I bought the full version. Very happy with it!

  13. Dirk Schwarzmann sagt:

    Hallo Alexander,
    vielen Dank für Dein tolles Programm, funktioniert super!
    Ich hätte eine Anregung:
    Da ja beim Wechsel von der Trial auf die Vollversion auch die bisherigen Einstellungen gelöscht werden, wäre es schön, man könnte diese vorher sichern um sie später wieder zu importieren – idealerweise in einer Datei, die man leicht auf weitere Geräte übertragen kann (also z.B. im Download-Ordner speichern oder als Mail versenden – das “Teilen” Menü würde sich hier wahrscheinlich anbieten).
    Wie in meiner Rezension schon geschrieben, wäre auch ein aufgebohrtes Widget nicht schlecht (WiFi Shortcuts+, https://github.com/opengait/opengait.github.io/releases/tag/Version24 macht das schon sehr schön), dann hätte man alles aus einer Hand.

  14. Dan Dinica sagt:

    Hi Alexander, when Play Store try to update the application , there is an error message about the opperation who can not be executed… My phone OS is Android 12 , UI 4.0. Please an advice …
    Thanks

    • wordpressadmin sagt:

      Hello,

      the app is currently unavailable, but a new version is already uploaded and is currently in review by Google. It should be available again soon. Sorry for inconveniences.

      Alexander Tartar

  15. Paul sagt:

    Hi Alexander,

    Frage bzgl. WLANs ohne DHCP: Wie kann ich die CLients einrichten? Wenn ich das WLAN im Standard-Android-Dialog einrichte kann ich ja auf statische IPs gehen, in Deiner sonst schönen App finde ich das leider nicht, da kann ich ja nur das Passwort eingeben. Any hints?

    Gruß

    • wordpressadmin sagt:

      Hallo

      Meine App ist an das neue WLAN-API gebunden, und dieses unterstützt leider nur DHCP-Adressen. Daher kann ich auch keine Unterstützung für statische IPs einbauen.
      Um dennoch fixierte IP-Adressen verwenden zu können, müssen im Router DHCP-Adressen reserviert werden. Dabei ist zu beachten, dass über das API auch ausschließlich randomisierte MAC-Adressen verwendet werden können, nicht aber die Geräte-MAC. Allerdings werden die MAC-Adressen von Android für jeden SSID genau einmal zufällig erzeugt und dann immer wieder verwendet. Nur die erweiterte MAC-Randomisierung darf nicht aktiviert sein, sonst ändert sich die MAC wirklich bei jeder Verbindung. Diese Option findet sich aber ohnehin nur in den Entwickleroptionen.
      Der Nachteil bzw. der Mehraufwand gegenüber “echten” statischen IPs bzw. der Geräte-MAC ist also, dass man mit mehreren IPs/MAC-Adressen (für jedes Netzwerk eine eigene) klarkommen muss.

      MfG
      Alexander Tartar

  16. Paulio sagt:

    Hi Alexander,
    Does it also compare 4g/5g, to wifi networks?

    • wordpressadmin sagt:

      Hello

      Indeed there is an option to switch to mobile data when the available WiFi signal strength is below a settable threshold and the 4g/5g signal is sufficiently strong.
      There is a free trial version (SmartWifiSelector Trial) which can be tested for 7 days to try out if it meets your requirements.

      Regards
      Alexander Tartar

  17. Nick sagt:

    Love the app. Tried many and this is by far the best. Thanks for all good work.
    I have one issue, the app gets killed by the android 12 system about once per week even though battery usage is unrestricted. Any workaround?
    Thanks

    • wordpressadmin sagt:

      Hello

      Try to disable adaptive battery. Seems to help or at least make it better.

      Alexander Tartar

  18. Jelle Cornelissen sagt:

    Hi Alexander,

    is it possible to set the app so that when the phone is restarted that the app automatically starts the service now you have to open the app once every time before it works?

    • wordpressadmin sagt:

      Hi
      No, it’s impossible. There is an Android policy which requires the app to be in foreground to start the service with all necessary permissions. So it is required to start the app once after rebooting the phone.

Hinterlassen Sie einen Kommentar



Anti-Spam by WP-SpamShield